Wake Forest: In Situ 3D Printing of Tailored Skin Grafts, a Possible Step Forward in Tissue Engineering

Spread the love

In recent years bioprinting has proved to be an important tool for tissue engineering applications and it holds great promise towards the fabrication of skin tissue. A team from Wake Forest Institute for Regenerative Medicine (WFIRM) has brought progress in this direction by developing a proof of concept validation of a mobile skin bioprinting system that provides rapid on-site management of full-thickness wounds. The prototype is intended to be used for wound healing and the coverage of large wound areas directly on the patient. The experiments were conducted on mice and pigskin, so this experiment is years away from being trialed in humans. For now, it is great news if you’re trying to repair a ham. Nonetheless, this study represents a significant advance in potential personalized wound treatment approaches as it is similar and goes further than other approaches in bioprinting skin directly onto patients.

3D Printing of Tailored Skin Grafts

It also represents a very strategic Intellectual Property move by Wake Forest to claim, potentially patent and exploit a logical path to large scale wound treatment. Bioprinting gradients, correct vascularization, actually implementing patient specific bioprinting, the combination of scanning and printing, and in situ printing of skin are all pivotal areas. This is especially relevant since Wake Forest has in the past been quick to press release and slow to publish when compared to others working in the field.   

This is salient since this idea could represent a substantial improvement in health care. Large, nonhealing or chronic wounds as the ones derived from burn injuries, diabetes or venous and pressure ulcers represent a burden for patients and mean large costs on health services. Only in the United States, over 7 million patients suffer each year from this issue, representing an expenditure of $25 billion each year. There is no need to explain then the importance of the improvement in regenerative medicine for our society.

The bioprinting system developed by the scientist at WFIRM offers a step forward to the improvement of this issue. It is a bedside machine that can tailor skin tissue directly on the patient.

The main components of the skin bioprinter system consist of a hand-held 3D scanner and a printing head with an XYZ movement system containing eight 260 µm diameter nozzles, each driven by an independent dispensing motor. The ZScanner Z700 scanner offers the ability to capture the entire wound in a continuous scan and it creates a wound map for printing.

Directly from the abstract:

“Once the scan is complete, the wound data is compiled to form a model of the wound. The scanned wound area is then processed using Geomagic Studio software orient the model to standard coordinates so the import into Artcam is ideal. Scanned data is in the form of an STL file that has been outputted from Geomagic and inputted to Artcam 3D software to obtain the full volume and the nozzle path needed to print the fill volume.”

Once the data is taken, it can be modified to better fit the structure of the wound to treat:

“The user can define a series of bitmap images where each non-black pixel corresponds to a cell drop, and the color of the pixel corresponds to the cell type to print. This method allows the user to create complex structures using any cell type in any configuration. Finally, a list of available cell types loaded in the printer is provided to the user by the print-head configuration.”

Once ready, it is used to generate the fill volume and the path points for nozzle head to print. The delivery system is similar to the ones used in traditional inkjet printing. It has several cartridges, each contains different biomaterials and every single nozzle is connected to a separate cartridge. It 3D prints directly on the wound a double layered skin substitute consisting dermal fibroblasts and epidermal keratinocytes cells that exactly match the patient’s wound.

 “The wound depth is then split into layers on the Z axis to determine which layers correspond to the dermis and epidermis. Each layer is overlaid with a series of XY lines that cover the entire wound area. These lines are used in conjunction with the cartridge-based delivery system to determine a path for the printer. The skin cell delivery system is controlled by a custom software employing a three-tiered architecture design based on the Microsoft.NET Framework 2.0 and written in C++.”

What makes this technology special is that while being mobile, the skin bioprinter has the ability of 3D print customize skin tissue directly on a patient by scanning and measuring the patient’s injury. Through the compilation and manipulation of data, it makes possible to manage extensive wound surface and deposit with precision customize biomaterial that simulates skin.

In contrast with the existing technologies used to heal wounds such as using a manually seeded matrix or cell spraying, this has possible advantages. The bioprinted skin may prove to be the most adequate due to its ability to place specific cell types into needed position and creating a complex skin structure that improves wound healing with better aesthetic properties. From an intellectual property standpoint, Wake Forest has really made a very timely disclosure towards what is the most straightforward path to personalized in situ 3D printing of skin tissue.  

At the same time, this technique has shown a positive outcome when applied on mice and pigskin wounds. The future of its success lies in the ability of this approach in conducting a successful clinical trial in humans with prosperous results, which we all hope for.

SOURCE: 3dprint site

Similar Posts
3D-printed glucose biosensors
Spread the loveA 3D-printed glucose biosensor for use in wearable monitors has been created by Washington State University researchers. The...
RPS BRINGS 3D PRINTING HARDWARE AND SUPPORT EXPERTISE TO AMUG FOR THE FIRST TIME
Spread the loveFor the first time, UK industrial 3D printer OEM and support provider RPS will be exhibiting at the 2019 Additive Manufacturing...
UK Researchers Use 3D Printing to Evoke Sensory Food Experiences
Spread the loveFood and water are necessary for humans to survive, no matter what, but they are also often a...

There are no comments yet, add one below.

Leave a Reply


Name (required)

Email (required)

Website