Are you still looking for a big assembled 3D printer? Then this is the one that you deserve to have. It comes with three parts, it just needs a few steps to build up. This machine(3DP-20) has big printing capacity. You can print a big model with an i3 printer. NO soldering, NO measuring. It is easy to do calibration. Every printer must have a more than 2-4 hours test printing before shipping. We will make sure all printers are in good condition. REMOTE FEEDING mode makes the extruder more lighter, faster and stable.
It comes with three parts. It only takes a few steps to build it up, it is very easy and you just need about 10 mintues to build. All wires are attached with lables, Don’t worry about wrong wiring. All you have to do is hook everything up.
Printing Size： 300*300*400mm
Layer thickness: 0.05-0.4mm (adjustable)
Nozzle temp: 250 degree
Extruder temperature: PLA: 210
Hot bed temperature: PLA: 50
Printing Speed：Normal: 80mm/s, Max.: 200mm/s
Working condition temp: 10-30℃, Humidity:20-50%
Nozzle: 0.4mm, 0.3mm, 0.2mm
This 3DP-20 can print big models, the max printing size is 300x300x400mm/11x11x15 inches.
It also could be upgraded to 500x500x500cm if you need.
Continuous working time last more than 100 hours.
Extruder quantity: 1
Body Structure: Imported V-Slot Aluminum Bearings
Nozzle Diameter：Standard 0.4mm
Printing Method: TF card(off-line), contact to the PC(online)
LCD screen: 3 inch LCD screen with aircraft knob
Power supply: input: 110-240V output: 12V/30A
Hot bed: 4mm aluminum alloy platform, 3mm special tempered glass
Operating Software：CURA、Repetier-Host simplify 3D
Software supporting: PROE, Solid-works, UG, 3d Max, Rhino 3D design software, etc.
Cura language: English
Interface language: English
Format : STL, G-Code
Operating System: Linux, Windows, OSX