MeCreator 2 is Geeetech`s latest desktop 3D printer with half-opened and box-type design.
Print technology: FDM
Build volume: 160x160x160mm (6.3″ x 6.3″ x 6.3″)
Positioning precision: X/Y：0.05mm. Z：0.02mm
Print Speed: 60-80mm/s
Filament diameter: 1.75mm
Nozzle diameter: 0.4mm
Filament type: ABS/PLA
Operating system: Windows/Mac/Linux
Control software: GT-Host Repetier-Host, Printrun, Cura
File format: .STL, 3ds, obj, amf, dae, G-code
Max heated bed temperature: About 110 °C
Max extruder temperature: About 240°C
Input: 110V/220V 360W
Control Board: GT2560B
Connectivity: USB, SD card (support stand-alone printing)
Chasis: metal sheet
Build Platform: Aluminum alloy plate+ heatbed
XYZ Rods: Wear-resistant, stainless steel and lead screw (Z axis)
Stepper Motors: 1.8°step angle with 1/16 micro-stepping
Physical Dimensions and Weight:
Machine Dimension: 320x320x360 mm
Shipping box Dimension: 460x460x410mm
Machine Net weight: 9.05kg
Machine shipping weight: 17.5kg
If your printer is clogged, here is the way to deal with this problem.You also can check the way on our listing pictures.
1.Find the Ejector pin
The ejector pin is the accessories, came with the 3D printer.
2.Heat up the extruder.
Turn on the printer, heat up the temperature until the temperature of heat bed is 55℃, the temperature of extruder is 200℃.
3.Pull out of the filament.
Press the pressure level, and pull push the filament then pull it out of the extruder.
4.Clean the nozzle.
Press the ejector to make it go through the Tube until all the filament goes out of the nozzle.