3D Printing Supplies & Parts

MadeSolid Clear Vorex Resin – 1 Liter

MadeSolid Clear Vorex Resin – 1 LiterMadeSolid’s Vorex Resin is built for strength and durability. This resin will enable you to print functional parts that will hold up in real applications. Vorex Resin has increased flexural and impact strength. It is easy to clean, and compatible on a variety of SLA/DLP... Read More »

MadeSolid MS Resin V2 for SLA and DLP 3D Printers, 1 Liter, Blue

MadeSolid MS Resin V2 for SLA and DLP 3D Printers, 1 Liter, BlueOur formulas are crafted to not be limited to a single printer – many SLA/DLP printers are compatible with MS Resin including the Form1. The final surface texture has a unique matte finish. The resin is less viscous than most other resins and is easier to clean out from vats and off prints. It’s ideal... Read More »

Ange (Anjou) Super Resin UV Crystal 55g / resin liquid AG-4040

Ange (Anjou) Super Resin UV Crystal 55g / resin liquid AG-4040It is a UV resin solution of hard type that hardens with ultraviolet light. Season or weather When cured in sunlight, work size, slightly varies depending on the thickness, but mass at about 15 to 30 minutes in sunny day. If you use the optional UV lamp of you lump in 3-10 minutes. Is recommended... Read More »

3D-Fuel 3D-Fuel Wound-Up Coffee Based 3D Filament 500g spool 1.75mm +or- 0.05mm Made In USA

3D-Fuel 3D-Fuel Wound-Up Coffee Based 3D Filament 500g spool 1.75mm +or- 0.05mm Made In USAWound Up is a coffee filled 3D printing filament made using waste byproducts from coffee. Wound Up uses those coffee left-overs to create a special 3D printing material with visibly unique print finishes. The filament produces products with a rich brown color and a noticeable natural grain. Caution: Wound Up coffee filament uses PLA as... Read More »

MadeSolid Pink MS Resin for SLA and DLP 3D Printers, 1 Liter

MadeSolid Pink MS Resin for SLA and DLP 3D Printers, 1 LiterThe MadeSolid MS Resin is one liter of pink photopolymer for use with most stereolithography (SLA) and digital light processing (DLP) 3D printers, including the Form1, B9Creator, Little SLA, and Deep Imager 5 (sold separately). The resin cures in UV light to produce parts with a matte surface finish and has a low viscosity for... Read More »

Monocure 3D Rapid Resin for Low Power UV 3D printers 500ml Clear

Monocure 3D Rapid Resin for Low Power UV 3D printers 500ml ClearOur Rapid product range is designed for low powered LED DLP type printers such as the Wanhao Duplicator 7. The cure speed is up to 4 X faster than our standard resin. The transparent appearance... Read More »

Porcelite Porcelain 3D Printing Resin

Porcelite Porcelain 3D Printing ResinA photo-curing ceramic composite resin for sla/dlp or other 3d printers with a UV light source. 3d printed objects are porcelain polymer composite. Fire to 2100 degrees Fahrenheit in a vented kiln to produce a 100% porcelain object. Leave as is or finish with any commercial... Read More »

Wanhao UV Cure 3D Printer Resin – White 1L

Wanhao UV Cure 3D Printer Resin – White 1LThis is resin made for the Wanhao Duplicator 7. You can use this resin with any UV cure machine Works perfectly with DLP printers, UV lasers, and UV LEDs. Keep in mind that the curing time is very... Read More »

XTC-3D High Performance 3D Print Coating – 24oz. Unit

XTC-3D High Performance 3D Print Coating – 24oz. UnitXTC-3D® is a protective coating for smoothing and finishing 3D printed parts. Two liquids are mixed together and brushed onto any 3D print. Coating self-levels and wets out uniformly without leaving brush strokes. Working time is 10 minutes and cure time is about 4 hours (depending on mass and temperature). XTC-3D® cures to a hard,... Read More »

XTC-3D High Performance 3D Print Coating, 6.4 Oz

XTC-3D High Performance 3D Print Coating, 6.4 OzXTC-3D® is a protective coating for smoothing and finishing 3D printed parts. Two liquids are mixed together and brushed onto any 3D print. Coating self-levels and wets out uniformly without leaving brush strokes. Working time is 10 minutes and cure time is about 4 hours (depending on mass and temperature). XTC-3D® cures to a hard,... Read More »

Next Page »