XTC-3D High Performance 3D Print Coating, 6.4 Oz

XTC-3D High Performance 3D Print Coating, 6.4 Oz

Spread the love

Product Features

  • Epoxy Coating for 3D Printed Objects
  • Smooths and finishes 3D Printed Objects
  • Compatible with FDM, SLA and SLS prints. A little goes a long way: 1oz covers 100 sq. inches!
  • It works with PLA, ABS, Laywoo, Powder Printed Parts and other rigid media. It also can be used to coat EPS, EPDM and urethane foam as well as wood, plaster, fabric, cardboard and paper.
  • Dries clear with a gloss finish. Use with UV Resistant Pigment for XTC-3D to color and seal at the same time!
Price: $23.99
(as of 10/17/2018 12:46 UTC - Details)

Product Description

XTC-3D® is a protective coating for smoothing and finishing 3D printed parts. Two liquids are mixed together and brushed onto any 3D print. Coating self-levels and wets out uniformly without leaving brush strokes. Working time is 10 minutes and cure time is about 4 hours (depending on mass and temperature). XTC-3D® cures to a hard, impact resistant coating that can be sanded, primed and painted.
Adding colors and metal effects is easy. Use with UV Resistant Pigment for XTC-3D (ASIN: B01BKSLHHK) to paint and seal at the same time!
Inexpensive to Use: 1 oz covers 100+ square inches.
90% Time & Labor Savings: XTC-3D® fills in 3D print striations and creates a smooth, high gloss finish. The need to post finish is almost eliminated.
Coat any 3D Print Surface: XTC-3D® can be applied to both SLA and SLS prints. It works with PLA, ABS, Laywoo, Powder Printed Parts and other rigid media. It also can be used to coat EPS, EPDM and urethane foam as well as wood, plaster, fabric, cardboard and paper.
XTC-3D® does not contain VOC’s, phthalates or phosphates.



Customer Reviews

Similar Posts
MadeSolid Clear Vorex Resin – 1 Liter
MadeSolid Clear Vorex Resin – 1 Liter
Spread the love Product Features1 Liter of MadeSolid Vorex Resin which is built for strength and durability.This resin will enable...
MadeSolid MS Resin V2 for SLA and DLP 3D Printers, 1 Liter, Blue
MadeSolid MS Resin V2 for SLA and DLP 3D Printers, 1 Liter, Blue
Spread the love Product FeaturesBlue Photopolymer ResinCompatible with Machines like the Form1, Envision Tec, B9 Creator, and other SLA/DLP-type technologyFast...
Ange (Anjou) Super Resin UV Crystal 55g / resin liquid AG-4040
Ange (Anjou) Super Resin UV Crystal 55g / resin liquid AG-4040
Spread the love Product FeaturesCapacity: 55gBody size:? 3.5 ~ H12.5 (cm)Main Country of manufacture: Japan Price: $42.55 (as of 10/16/2018...
%d bloggers like this: